Pattern developed at architectural scale
Opening ratio, motif size and visual density are reviewed against the full elevation rather than judged from a small sample alone.
01 / 06
Custom Gold Stainless Steel Laser-Cut Screen Partition
Custom stainless steel screens developed from architectural drawings for hotel, retail, residential and commercial interiors. Pattern, panel division, borders, finish direction and installation interfaces are coordinated as one project package.
Product description
A gold stainless steel laser-cut screen partition adds structure to an interior without making the space feel closed in. The open geometric pattern breaks up the room, softens long sightlines and gives the light somewhere to travel. It works particularly well at hotel entrances, reception areas, restaurant dining rooms and residential living spaces where a solid wall would feel too heavy.
Each screen is made to suit the project. The decorative panel is cut from stainless steel and set into a matching frame, creating a clean architectural edge around the pattern. The gold-tone finish gives the partition a warm, polished appearance that sits comfortably with stone, timber, glass, upholstery and decorative lighting. From a distance, the screen reads as a refined feature. Up close, the laser-cut detail gives the surface depth and texture.
The pattern can be adapted to the room. A more open design keeps the divider airy and lets more light through. A denser design creates greater privacy around dining tables, lounge seating or a private residential zone. The panel can be used as a fixed room divider, a wall-mounted decorative screen, a lobby feature or part of a larger series of matching partitions. Several panels can be aligned across a wide opening, while a single tall panel can create a strong focal point at an entrance.
Xinmao Metal can customize the screen size, pattern scale, frame profile, finish and installation detail to match the interior design. The height and width can be adjusted around ceiling lines, floor finishes and furniture layouts. The frame can be understated when the pattern should take the lead, or made more prominent for a more formal architectural look. Gold is shown here, but other surface colors and textures can be selected to coordinate with the wider material palette.
This custom stainless steel screen partition is designed for projects that need both decoration and practical zoning. It gives restaurants a more intimate dining layout without hiding the room. It gives hotel lobbies a clear arrival sequence while keeping the reception and lounge visually connected. In homes and villas, it separates living, dining or entry areas with a lighter touch than a conventional wall.
The result is a long-lasting decorative metal screen with a clear purpose. It defines space, adds a considered layer to the interior and keeps the room open. Whether it is used as a gold laser-cut room divider, a hotel lobby partition or a decorative stainless steel feature screen, the design can be tailored to the character of the project.
Every screen is made around the finished interior, so there is room to refine the smallest visible details. The pattern can line up with wall panels or ceiling features. The border can be widened to create a stronger frame. The panel can stop above the floor for a lighter appearance, or extend down to the floor for a more formal division. These choices allow the decorative screen to feel like a natural part of the room from the moment guests walk in.
Product Details
- Product type
- Custom architectural metal screen or room divider
- Material
- Stainless steel or project-specified architectural metal
- Pattern development
- Custom motif, geometric pattern or design reference
- Panel construction
- Flat, folded or framed panels developed to coordinated drawings
- Surface finish
- Selected from approved samples and project finish references
- Dimensions
- Custom module size based on elevation, access and transport constraints
- Borders and joints
- Coordinated around panel rhythm, surrounding finishes and installation access
- Installation interface
- Wall, floor, ceiling or concealed support details as required by the project
- Typical applications
- Lobbies, lounges, restaurants, retail, residences and feature partitions
- Information for quotation
- Drawings, dimensions, quantity, location, pattern and finish reference
Architectural Screens Developed Around the Project
An architectural metal screen has to work from several distances. From across a lobby it establishes proportion and rhythm. At close range, the quality of the border, joints and surface finish becomes just as important as the pattern itself. For this reason, Xinmao develops each screen from the project elevation rather than treating it as a standard decorative panel.
Design development
The process begins with the available drawings, reference images and intended use. We review the opening size, sight lines, privacy requirement and relationship with nearby walls, ceilings, doors or fixed furniture. The pattern can then be adjusted to suit the panel proportions and viewing distance. This avoids awkward cropped motifs, weak edges and panel divisions that interrupt the overall composition.
Panel and frame coordination
Large elevations often require several panels. Their divisions need to follow the architectural grid while remaining practical for fabrication, transport and installation. Border widths, joints, backing frames and fixing positions are therefore considered together. Where access panels, door leaves or changes in level are involved, these interfaces can be incorporated into the screen package before production.
Material and finish direction
Material and finish are selected against the approved project specification and location. The visual effect may call for a restrained satin surface, a directional brushed finish, a reflective finish or a coloured metal tone. Finish direction and panel orientation are documented so adjacent pieces read consistently after installation. If the screen sits beside wall panels, ceilings or other architectural metalwork, samples and references can be reviewed as a coordinated set.
From approval to fabrication
Once the design direction is confirmed, the screen is translated into coordinated production information. The package can include panel references, module dimensions, joint locations and installation details appropriate to the project. This gives the contractor a clearer basis for approval and reduces avoidable decisions at site.
The result is not a catalogue pattern enlarged to fill an opening. It is a screen system resolved around the space, the drawing and the way the finished metalwork will be viewed and installed.
For an initial review, send the elevation, overall dimensions, preferred pattern direction, finish reference, quantity and project location.
Design and Fabrication Highlights
Panel divisions planned into the design
Module breaks, borders and joints are positioned to support the composition while accounting for fabrication, transport and installation.
Finish direction kept consistent
Panel orientation and finish references are coordinated so neighbouring pieces retain a controlled tone and surface direction.
Interfaces resolved before production
Fixings, backing frames, door leaves and adjacent finishes can be reviewed with the screen instead of being left as site decisions.
What This Screen Solves
Privacy is needed, but the room must remain open
Pattern density can be adjusted to interrupt direct views while allowing light, depth and a visual relationship between adjoining zones.
The chosen motif does not fit the final elevation
The pattern is reviewed across the complete opening so repeats, borders and cropped areas can be corrected before approval.
Large panels are difficult to transport and install
The elevation can be divided into practical modules with joint positions coordinated into the architectural grid.
Metal finishes look inconsistent across the interior
Screen samples can be compared with nearby wall panels, ceilings, doors and trims so finish tone and direction are controlled as one package.
Installation details are left unresolved until site work begins
Support, fixing and interface requirements are discussed during detailing, giving the contractor clearer information before fabrication.
Frequently Asked Questions
Can you develop the screen from our architectural drawings?
Yes. Send the available elevation, plan, key dimensions and reference images. We will review the opening, panel divisions, pattern direction and interfaces before preparing the quotation direction.
Can the pattern be customised for a specific project?
Yes. The starting point may be a client motif, a geometric reference or a required level of privacy. The pattern still needs to be checked against panel size, borders, joints and viewing distance before it is confirmed.
What information do you need for an initial quotation?
Please provide the overall dimensions, quantity, project location, application, preferred material or finish, pattern reference and any available drawings. If some information is not final, mark it clearly so the quotation can be based on stated assumptions.
How are large screen elevations divided into panels?
Panel size is considered against the architectural grid, available material, fabrication method, transport route and installation access. Joint positions are then coordinated so they form part of the elevation rather than appearing as arbitrary breaks.
Can the screen finish match other metalwork in the project?
Finish references, approved samples or images of adjacent metalwork can be reviewed with the screen package. Final colour and surface approval should be based on physical samples where appearance is critical.
Can doors or access panels be integrated into the screen?
They can be considered when the opening, hardware requirement, support condition and access direction are shown in the drawings. Their borders and pattern alignment should be resolved with the surrounding fixed panels.
Do you provide installation information?
The required level of installation information depends on the project scope. Share the wall, floor and ceiling conditions so appropriate fixing and support interfaces can be discussed during detailing.
Can we review a sample before the full order?
Sample requirements can be discussed according to the pattern, finish and project schedule. Confirm the sample size and what it needs to demonstrate, such as colour, texture, opening ratio or edge detail.