Paired bronze elevator doors with patterned side panels for custom Xinmao Metal elevator design
1 / 11

Custom stainless steel elevator interiors

Decorative Elevator Lobby Metal Cladding Design Options

Compare single and paired elevator entrances, from patterned bronze surrounds to restrained dark portals and reflective lobby cladding.
Request a quote → Contact us now →
Product description

This gallery presents several elevator lobby entrance treatments rather than one fixed product: contrasting metal jambs, patterned head panels and wall-side cladding for single or paired lift portals. It is intended for architects comparing hotel, residential and mixed-use lobby finishes.

Select one reference and mark the metal areas on your elevation before requesting a quote. Xinmao Metal can develop the decorative facing and finish sample to suit that scheme; stone-look walls, lighting and original lift equipment are separate unless specified. Interface drawings should identify the existing frame, wall backing, inspection access and seal locations. Final dimensions and installation scope depend on the approved project drawings.

Scope and Specification

Compare the references by single or paired entrance layout, the extent of wall-side metal, head-panel geometry and the transition to adjacent finishes. Select one design and mark the stationary wall panels, fixed door surrounds and separately supplied non-metal areas on the elevation. A comparison gallery does not establish one standard construction or one completed project.

Project Questions

How does lobby cladding differ from elevator door surrounds?

Lobby cladding covers the wider wall area; surrounds frame each entrance. Use separate scope drawings while coordinating finish, joints and interfaces across both.

What determines the price of elevator lobby cladding?

Wall area, panel size, backing, finish, corners, openings, door-surround interfaces and installation conditions affect cost. Quote the agreed scope from elevations and details.

Interior package scope

Cabin wall panels, doors, jambs, ceilings, skirting, trims and selected feature elements can be coordinated around approved elevator supplier information.

Information for review
  • Freeze one selected reference and issue a marked metalwork elevation; do not combine dimensions or installation details from unrelated gallery schemes.
  • For paired portals, survey both installed lift frames and the intervening wall from a common floor datum before setting out head lines and panel joints.
  • Agree metal-to-wall returns and visible gaps with the adjacent-finish contractor, including the backing and fixing approach; gallery photos do not establish the hidden construction.
  • Match component labels to the approved surface direction and finish sample, protect reflective faces during installation, and retain every confirmed lift access and door movement zone. Further guidance: Architectural metal systems and project coordination
Delivery & Order Information

Lead time ：10–15 days after drawing confirmation (standard screen / ceiling / wall panel)
Minimum order ： No fixed MOQ; feasibility assessed per project
Standards ：Fabricated to ASTM A240 / EN 10088 material spec; finish per ASTM A480

PRODUCT DETAILS

Elevator interior engineering details

Five coordinated areas used to develop the decorative cabin package around the approved elevator system.

All dimensions, loads, clearances and technical interfaces must be confirmed with the elevator supplier and responsible project parties.

Metal Yanda Ludaopei Hospital Repeated Curved Columns

Package elements

Cabin wall panels, feature walls, doors, jambs, ceilings, skirting, trims and selected handrail interfaces.

The exact scope is confirmed with the elevator contractor and project team.

Panel composition

Flat, folded, framed, patterned, mirror-accented or mixed-material decorative panels.

Panel arrangement responds to cabin proportions, control locations, maintenance access and design intent.

Design coordination

Matched or coordinated finishes with lobby doors, portals, wall panels and surrounding trims.

Finish direction should be reviewed across both cabin and landing interfaces.

Elevator interiors developed as a coordinated package

Elevator interiors combine close-range architectural finishes with strict cabin interfaces. Xinmao develops the decorative panels around the confirmed supplier information and the wider interior design language.

Decorative Elevator Lobby Metal Cladding Design Options

Choose an Entrance Composition Before Specifying

This collection of lobby design options ranges from a narrow single portal to paired entrances with a shared central wall feature. Select the composition that suits the building's circulation and elevation, then define the metalwork for that reference. The gallery is not a catalogue of one standard assembly.

Paired Lift Portals and Central Wall Features

Several options place two entrances around a central panel, display area or decorative screen. The relationship between those three elements determines the overall balance. Coordinate portal widths, top lines and wall divisions together, while keeping screens and other feature components outside the cladding quote unless specifically included.

Patterned Bronze and Reflective Alternatives

Patterned warm-metal areas give some schemes a decorative character; darker plain portals and reflective surrounds offer different visual directions. Compare samples for the selected design rather than mixing every finish in the gallery. A colour or pattern reference alone does not define the alloy, coating or fabrication process.

Develop the Edge Beside Adjacent Finishes

Metal jambs meet pale wall fields, coloured panels and other non-metal surfaces across the design options. Resolve each selected junction in section, including returns, backing and the intended visible joint. Separate component arrangements may be considered where site variation makes a one-piece wrap unsuitable, subject to approved detailing.

Coordinate Repeated Finishes Across the Lift Bank

Where portals repeat, label component positions and agree the surface direction, colour and gloss against a common sample. Review the group under representative lobby lighting. This provides an acceptance reference for the selected metalwork without promising that different materials or production batches will appear absolutely identical.

How Do You Obtain a Comparable Quote?

Send one selected reference with a marked elevation showing stationary surrounds, wider wall panels and separately supplied features. Include opening quantities, verified dimensions, backing information and finish expectations. Comparing quotes against the same drawing scope is more useful than comparing the apparent door size in different photographs.

Are the Pictured Doors Part of the Package?

Visible operating doors do not automatically form part of the decorative lobby supply. Xinmao Metal develops the approved facing components and finish sample for the selected scheme. Existing lift equipment, lighting and non-metal wall finishes remain separate unless the project quotation explicitly identifies them.

What Needs Approval Before Fabrication Starts?

Agree the selected elevation, head and jamb sections, substrate condition, access locations and lift-frame boundary. Have the lift contractor confirm movement and equipment clearances, while the building team confirms support and adjacent finishes. Release production dimensions only after these project interfaces have been coordinated.

Elevator details that protect the design intent

The finish package is developed around the real cabin, not applied as an unrelated decorative layer.

Single and Paired Entrance Layout Choices

The gallery offers different opening arrangements, helping architects assess a compact individual portal against a wider paired composition with a shared centre feature.

Plain Surfaces or Decorative Pattern Accents

Restrained dark finishes and patterned bronze directions create different levels of emphasis. Choose the character appropriate to the lobby rather than treating them as interchangeable specifications.

Metal Edges Within a Wider Wall Elevation

The design options show how surrounds relate to coloured panels, pale walls and central features, extending the brief beyond the door perimeter alone.

Reflective Portals for Selected Focal Areas

Mirror-like surfaces introduce a different relationship with surrounding light and materials. Their final appearance needs sample approval and coordinated backing, not a finish name alone.

What a coordinated elevator interior solves

Project challenge

Cabin and landing finishes do not match

Xinmao response

Finish references can be reviewed across cabin panels, doors, jambs and nearby architectural metalwork.

Project challenge

Controls and ventilation interrupt the panel design

Xinmao response

Confirmed supplier interfaces are integrated into panel divisions and edge details before fabrication.

Project challenge

Decorative additions exceed available allowances

Xinmao response

Panel construction is developed within limits confirmed by the elevator supplier and responsible project team.

Project challenge

High-contact surfaces quickly show marks

Xinmao response

Finish direction and practical cleaning requirements are considered alongside the desired appearance.

Project challenge

Maintenance access is blocked by decorative panels

Xinmao response

Selected panels or trims can be coordinated as removable elements where the approved system requires access.

Elevator finishes in completed interiors

View more

Elevator interior questions

Practical answers for design and construction teams reviewing a custom elevator finish package.

Custom architectural stainless steel screen detail
01Is an elevator entrance header a decorative cover or part of the door mechanism?

Our entrance header refers to decorative metal cladding above the landing door. It is specified separately from the elevator door operator, structural header and rated entrance assembly. Fixings, clearances, access and the junction with the door jambs are reviewed against approved elevator and architectural drawings.

02How do you coordinate the header and jamb cladding with the lobby wall?

We review the entrance opening, visible returns, wall build-up, adjacent finishes and panel joints together. Final sizes should follow confirmed site dimensions and the elevator supplier's entrance drawings. The project team should agree who prepares the substrate and who completes any required fire stopping.

03Can cab panels be removed for maintenance?

Where the approved elevator system requires access, selected panels or trims can be detailed for removal. Access locations and removal clearances should be marked on the supplier drawings before the decorative layout is approved.

04Can the cab ceiling include lighting?

The decorative ceiling can be coordinated around an approved lighting layout and required access. Light fixtures, wiring and emergency lighting should be specified and approved by the responsible elevator and electrical teams unless explicitly included in the agreed scope.

05Which stainless steel finish is best for a high-traffic elevator?

The choice depends on the desired appearance, touch frequency, cleaning routine and lighting. Brushed, textured, mirror and selected coloured finishes can be reviewed through physical samples. A sample should be assessed in representative lighting, especially around doors and controls where marks are more visible.

06How should stainless steel elevator panels and doors be cleaned?

Use the care instructions approved for the selected finish or coating. Before using any cleaner across the whole surface, test it on a discreet area and avoid methods that could scratch or alter the finish. Request a finish-specific care sheet with the approved sample.

07Can you match the finish across cab walls, doors and elevator lobby cladding?

We can review these visible elements as one finish family using approved samples and a coordinated panel layout. The final match depends on substrate, finish process, batch, viewing angle and lighting; samples and acceptance criteria should be agreed before production.

08Which elevator interior elements can be included?

The agreed scope may include cabin wall panels, feature walls, ceilings, doors, jambs, portals, skirting and selected trims, subject to supplier coordination.

09Do you coordinate with the elevator supplier?

Yes. Approved supplier drawings, dimensions, allowances and technical interfaces are essential inputs for the decorative package.

10Can an existing elevator interior be refurbished?

Refurbishment can be reviewed after the existing cabin, substrate, clearances, condition and supplier requirements are confirmed.

11What finish options are available?

Brushed, mirror, textured, etched, embossed and selected PVD-coloured stainless steel finishes may be considered, subject to sample approval and product suitability.

12How are weight and clearance constraints handled?

All relevant limits must be supplied and confirmed by the elevator provider or responsible consultant. Panel construction is then developed within those confirmed constraints.

13Can a sample or mock-up be prepared?

Physical finish samples and representative panel details can be discussed once the design direction and scope are defined.

14Who installs the decorative package?

Installation responsibility depends on the project scope. The sequence and interfaces should be agreed with the elevator contractor and site team before production.

15What information is needed for a quotation?

Provide supplier drawings, cabin dimensions, quantities, scope elements, finish references, project location, programme and any confirmed technical constraints.