Custom stainless steel elevator interiors
Satin champagne stainless steel panels create a coordinated decorative finish across the elevator door faces and cabin surfaces shown in these references. Xinmao Metal supplies the approved stainless steel facing components, not the complete lift car, operating door assembly, controls or safety equipment. The gallery illustrates door and cabin finish directions; the quotation identifies each supplied component separately.
Satin champagne describes the intended surface appearance. Confirm the stainless steel grade, face thickness, backing, grain or texture, colour and any coating process against the approved material schedule and physical sample. The images alone do not establish a PVD process, standard panel thickness or tested assembly rating.
Panels attached to moving doors or fitted inside the cab require review by the elevator supplier or responsible elevator contractor. Submit the proposed construction and estimated complete weight, and agree fixing details, door movement, clearances, control openings and maintenance access before fabrication. Fixed entrance surrounds, when required, are a separately marked and quoted scope.
Provide the elevator drawings, door and cabin elevations, component quantities, finish reference, project location and delivery programme. Installation responsibilities, removal work and any required equipment checks are confirmed in the project scope.
It specifies the intended appearance of the stainless steel facing. Agree the actual texture, colour range and any coating process with a physical sample under representative lighting. The colour name alone does not identify PVD or establish a performance rating.
No. Door-facing panels are attached to moving leaves, while surrounds cover the stationary entrance perimeter. Mark them separately on the drawings and quotation, and obtain elevator-contractor approval for any facing attached to operating equipment.
The elevator supplier or responsible elevator contractor reviews the proposed panel construction, complete added weight, fixing method, movement and clearances. Preserve control and maintenance access; decorative fabrication follows the approved information and does not replace the required equipment review.
Cabin wall panels, doors, jambs, ceilings, skirting, trims and selected feature elements can be coordinated around approved elevator supplier information.
Lead time ：10–15 days after drawing confirmation (standard screen / ceiling / wall panel)
Minimum order ： No fixed MOQ; feasibility assessed per project
Standards ：Fabricated to ASTM A240 / EN 10088 material spec; finish per ASTM A480
PRODUCT DETAILS
Five coordinated areas used to develop the decorative cabin package around the approved elevator system.
All dimensions, loads, clearances and technical interfaces must be confirmed with the elevator supplier and responsible project parties.
The exact scope is confirmed with the elevator contractor and project team.
Panel arrangement responds to cabin proportions, control locations, maintenance access and design intent.
Finish direction should be reviewed across both cabin and landing interfaces.
Final grade, thickness and backing follow the project specification and elevator supplier requirements.
Construction is reviewed for appearance, panel depth, handling and supplier interface.
All relevant limits must be confirmed by the elevator supplier or responsible consultant before release.
Availability and suitability are confirmed for the selected panel and location.
Practical cleaning and touch visibility should be considered alongside appearance.
Samples should be reviewed under lighting close to the intended cabin condition where practical.
The process route follows the approved design and selected finish.
Confirmed dimensions reduce uncontrolled adjustments during installation.
Removal strategy should be coordinated with the elevator supplier and maintenance plan.
Final fabrication should follow approved and verified information.
Sequence is coordinated with the elevator contractor and project programme.
Care methods follow the approved finish and supplier requirements.
Elevator interiors combine close-range architectural finishes with strict cabin interfaces. Xinmao develops the decorative panels around the confirmed supplier information and the wider interior design language.
The finish package is developed around the real cabin, not applied as an unrelated decorative layer.
Finish references can be reviewed across cabin panels, doors, jambs and nearby architectural metalwork.
Confirmed supplier interfaces are integrated into panel divisions and edge details before fabrication.
Panel construction is developed within limits confirmed by the elevator supplier and responsible project team.
Finish direction and practical cleaning requirements are considered alongside the desired appearance.
Selected panels or trims can be coordinated as removable elements where the approved system requires access.
Hospitality
At Gevora Hotel Dubai, mirror-finish metal links the public interiors, while powder-coated aluminium screens shape the restaurant and factory-assembled stainless steel railings serve the...
View project
Residential
Finish selection should begin with behavior: reflection, touch, weathering and visual hierarchy. See how sheen, texture and openness change the way a metal surface...
View project
Commercial
Metal can carry brand identity at the facade, shape atmosphere overhead and withstand daily contact inside. See how each application assigns the material a...
View projectPractical answers for design and construction teams reviewing a custom elevator finish package.
Our entrance header refers to decorative metal cladding above the landing door. It is specified separately from the elevator door operator, structural header and rated entrance assembly. Fixings, clearances, access and the junction with the door jambs are reviewed against approved elevator and architectural drawings.
We review the entrance opening, visible returns, wall build-up, adjacent finishes and panel joints together. Final sizes should follow confirmed site dimensions and the elevator supplier's entrance drawings. The project team should agree who prepares the substrate and who completes any required fire stopping.
Where the approved elevator system requires access, selected panels or trims can be detailed for removal. Access locations and removal clearances should be marked on the supplier drawings before the decorative layout is approved.
The decorative ceiling can be coordinated around an approved lighting layout and required access. Light fixtures, wiring and emergency lighting should be specified and approved by the responsible elevator and electrical teams unless explicitly included in the agreed scope.
The choice depends on the desired appearance, touch frequency, cleaning routine and lighting. Brushed, textured, mirror and selected coloured finishes can be reviewed through physical samples. A sample should be assessed in representative lighting, especially around doors and controls where marks are more visible.
Use the care instructions approved for the selected finish or coating. Before using any cleaner across the whole surface, test it on a discreet area and avoid methods that could scratch or alter the finish. Request a finish-specific care sheet with the approved sample.
We can review these visible elements as one finish family using approved samples and a coordinated panel layout. The final match depends on substrate, finish process, batch, viewing angle and lighting; samples and acceptance criteria should be agreed before production.
The agreed scope may include cabin wall panels, feature walls, ceilings, doors, jambs, portals, skirting and selected trims, subject to supplier coordination.
Yes. Approved supplier drawings, dimensions, allowances and technical interfaces are essential inputs for the decorative package.
Refurbishment can be reviewed after the existing cabin, substrate, clearances, condition and supplier requirements are confirmed.
Brushed, mirror, textured, etched, embossed and selected PVD-coloured stainless steel finishes may be considered, subject to sample approval and product suitability.
All relevant limits must be supplied and confirmed by the elevator provider or responsible consultant. Panel construction is then developed within those confirmed constraints.
Physical finish samples and representative panel details can be discussed once the design direction and scope are defined.
Installation responsibility depends on the project scope. The sequence and interfaces should be agreed with the elevator contractor and site team before production.
Provide supplier drawings, cabin dimensions, quantities, scope elements, finish references, project location, programme and any confirmed technical constraints.
